什么是机闸一体式闸门的详细信息
PZ机闸一体式铸铁闸门正常使用水头1-6米，还可承受一定的反向水头，为满足用户要求，可制造高水头闸门。 闸门安装用整体安装，二期浇注，将闸板与闸框的封水间隙调到0．3mm以下，方可进行二期浇注。 PZ机闸一体式铸铁闸门在浇注混凝土时，流进闸板、闸框、斜铁、挡板间隙中的灰浆必须清除，防止灰浆凝固后影响闸门启闭。 闸门上下框设有固定块，可防止闸板在运输吊装等过程中滑出，安装凝固后(使用前)应先卸掉上闸框的固定块和下框紧回螺栓，方可启动。 PZ机闸一体式铸铁闸门启闭时，应注意闸板的上下板限位置，以免损坏闸门或启闭机。
启闭机闸门是一种水利机械产品。闸门我们也可以称为水闸，启闭机开启和关闭闸门所用的机械，也称闸门操作设备。闸门启闭机关系到水工建筑物的正常运行，除应满足一般起重机械的设计要求外，工作安全可靠和操作灵活方便具有特殊的意义。我厂主导产品有：QL-0.5T-50T单吊点、双吊点螺杆式启闭机。具有手推带锁式、封闭手摇式、手扳式和手电两用式等。QPQ、QPK5T-160T固定式、移动式、单、双吊点卷扬式启闭机；闸门有PZ、PGZ型铸铁闸门，钢结构闸门.
What is the detailed information of the integral gate PZ integral cast iron gate normal use head 1-6 meters, but also can withstand a certain reverse head, in order to meet user requirements, can manufacture high head gate. The second stage pouring can be carried out only when the sealing gap between the gate plate and the gate frame is adjusted below 0.3 mm by integral installation and second stage pouring. When pouring concrete, the mortar flowing into the gap of gate, gate frame, inclined iron and baffle must be removed to prevent the slurry from affecting the gate opening and closing after solidification. The upper and lower frames of the gate are provided with fixing blocks, which can prevent the gate from sliding out during transportation and hoisting. After installation and solidification (before use), the fixing blocks of the upper frame and the lower frame should be removed to tighten the bolts before starting. When opening and closing the integral cast iron gate of PZ locomotive gate, attention should be paid to the upper and lower limit position of the gate plate, so as to avoid damaging the gate or the gate of the hoist and shutter, which is a kind of hydraulic mechanical product. Gates can also be called sluices, the machinery used by the hoist to open and close the gates, also known as gate operating equipment. Gate hoist is related to the normal operation of hydraulic structures. Besides meeting the design requirements of general lifting machinery, it is of special significance to work safely, reliably and operate flexibly and conveniently. Our main products are: QL-0.5T-50T single hanging point, double hanging point screw hoist. The utility model has the advantages of hand push belt lock type, closed hand rocker type, hand wrench type and hand electric dual-purpose type, etc. QPQ, QPK5T-160T fixed, mobile, single and double lifting hoist; PZ, PGZ cast iron gates, steel structure gates
